Engine Compartment Panels

feeds@yuku.com (mustangstofear) — Sun, 08 Nov 2009 17:11:10 GMT

Hey guys, I have had a lot of calls and emails about our custom panels on the car that we just got done with, so I wanted let you know that they are ready to go. They are one of the few items that we were originally going to keep for ourselves and our own builds and did not intend to sell to the public. I wasn't going to sell our body kit either when I first started making parts, but am so glad I did because of all the cool people I have met on this forum and other builders. Anyway, I...

Sema 2009 pictures part 2

feeds@yuku.com (lep17) — Sun, 08 Nov 2009 03:07:37 GMT

Some more folks mainly new model stangs more to come .

badmood is a little blue

feeds@yuku.com (greedy67) — Sun, 08 Nov 2009 00:23:22 GMT

well after about a 2 years my super coupe went into paint here are the results so far

Sema 2009 Pictures ( Fords )

feeds@yuku.com (lep17) — Sat, 07 Nov 2009 14:40:25 GMT

Hi all I have a +%*% load of pictures from the show to share with you all so I will try and keep them in sections starting with ford .

Enjoy

Which color to choose

feeds@yuku.com (1967fastbackdotcom) — Sat, 07 Nov 2009 09:09:05 GMT

OK Guys and gals. I'm building the first prototype and would like everyone to help me pick a color. Remember I have to photoshoot this car so its got to be camera friendly. I appreciate everyones comments
NO PEPPER GREY!

1. Red/White stripes
2. Blue/White striped
3. Silver/Black stripes
4. Yellow/Black stripes
5. White/Blue stripes
6. Black/Silver stripes

I'm thinking Blue/White Stripes

What Fluids should i used in new engine, tranny, rear end?

feeds@yuku.com (GT500916) — Sat, 07 Nov 2009 00:30:15 GMT

I have been thinking about this for a while, and i think its time to go run to the store and pick up all the oils and fluids i need. Whats a good suggested engine oil to use on a never started engine, is there any additives i should use or do most oils come with them? 351W with about 10.5:1 compression. i have a 7 quarts oil pan, i just hope i get really good stuff.

For the TKO500 tranny it came with 3 bottle of Amsoil Manual Trans Fluid Synthetic.. will 3 be enough or should i get...

Rack and pinion installed slightly not correct???

feeds@yuku.com (GT500916) — Thu, 05 Nov 2009 20:35:47 GMT

I have been trying to contact aeroform about helping me out with the install of this rack and pinion.. however their customer service is not superb, rack and pinion didnt come with instructions, so i put things up as i see them. Maybe its me, but something seems not right, either the bracket or the tie rods, or both, as if i have them installed upside down or something.

Saw this crazy Eleanor down the street at a mini meet...

feeds@yuku.com (GT500916) — Sat, 31 Oct 2009 21:25:45 GMT

went over to a mustang store to pick up few little parts, saw this bad boy down the street at a mini car meet guy has something like $40,000 in the engine alone, and about $250k in everything else.... ran into mikey there... about a week ago ran into him at harbor freight... something is fishy here!!!

WTB: original 67 gauge cluster

feeds@yuku.com (sentipede) — Fri, 30 Oct 2009 21:36:50 GMT

Like the title says, I am looking to buy an original cluster for a 67. Bezel or lens condition is not of importance, just looking for really nice black gauges with no fading, damage, etc. I went with white face overlays and white LEDs on mine and have decided to go back.

Thanks in advance!

shifter for T-5 and Go Baby Go nitrous switch

feeds@yuku.com (keiths mustang) — Fri, 30 Oct 2009 19:44:31 GMT

Does anyone know where I can get a good, reachable gear shifter and eleanor nitrous switch, to complete my interior for my car. Classic recreations doesn't sell any of their stuff do they, I would like somthing to hide the wires mustang depot sells switch has anyone bought one of theirs.

New Fender Tag Design is ready!

feeds@yuku.com (67SuperSnake) — Thu, 29 Oct 2009 14:11:36 GMT

New Car tag design is in. These are in a higher definition than the old tags. The other only real change is that I had them take out the fake rivet holes, and fixed the URL to all caps.

They will have adhesive backing.

Tell me what you think!!!

I've been busy....

feeds@yuku.com (67SuperSnake) — Wed, 28 Oct 2009 11:52:26 GMT

...on a new project. Sorry I haven't posted in a while.

Took a trip to Vegas, rented the 2008 Yellow Lamborghini Gallardo Spider for a day

What a blast!!! But, DO NOT DO IT...... it causes you to do stupid things. Like...

SEMA

feeds@yuku.com (1967fastbackdotcom) — Wed, 28 Oct 2009 04:13:37 GMT

OK i would like to know who's going and what days

I fly in teusday at 3pm and leave thurday at 2:45PM

If your going i would like to meet you in person. Please PM me

Dynacorn Replacement Body Shells - Help !!

feeds@yuku.com (GoxBabyxGo) — Sun, 25 Oct 2009 12:13:21 GMT

hello

am planing to build my own eleanor, but am new in this form and am new in the building world, and i need all the help i can get.

1- what do u think is better for the eleanor to start with the Dynacorn Replacement Body Shells, or to start with a rusty 1967 fastback?
2- would it cost me more to start with Dynacorn Replacement Body Shells?
3- and what is the best high performance engine that would go with the 1967 mustang am talking about 800 hp+ ?
4- i...

I'm back...Again

feeds@yuku.com (Epegasus) — Sat, 24 Oct 2009 21:29:04 GMT

I'm older but no wiser. The build is still slugging alone. Here are the highlights http://oneallong.com/Cars/Pegasus-Project/9692542_yBdoy#653349427_woAUf

I started my car nearly a year before Gone In 60 Seconds (the sequel) hit the theaters. I've been around so long I actually was one of the 1st to get a kit from CenimaVehicles once I convinced Ray Claridge (owner) he...

Dyno today 665 RWHP and 626 torque

feeds@yuku.com (1967fastbackdotcom) — Thu, 22 Oct 2009 16:10:59 GMT

This was one fo our 750 Models today. Its got alot more but this is enough

Heres the dyno sheet. Look at the torque!!!! Amazing thing is that its very drivable everyday. Fuel injected and gets about 16 MPG

Brakes......

feeds@yuku.com (irishEleanor) — Mon, 19 Oct 2009 23:22:48 GMT

I need to get my brakes sorted on my car. I am going with power brakes using drilled and slotted Willwood front and back. I am buying my Mustang II front suspension and steering setup from Rod and customs and they also sell a Power booster/Mastercylinder/Pro. Valve kit for $409. Has anyone used this kit? Its the RC138 kit, link to the page of their catalog below.

Should i be considering any other options?

All opinions welcome.

Eleanor kit for sale - $2000 - Rex Orr Kit - MORE PICTURES

feeds@yuku.com (bek1973) — Mon, 19 Oct 2009 12:59:08 GMT

I have for sale a Rex Orr American Street Rod Eleanor fastback kit. Below are more pictures of the kit. If you have any questions, just email me at bek1973@yahoo.com .

$2000 or best offer gets the kit.

Eleanor body kit pictures

Thanks,
Brian

Finished Mustang

feeds@yuku.com (mustangstofear) — Sun, 18 Oct 2009 15:02:19 GMT

I had the engine compartment pics on here a while back and never got the finished car posted. It's been done about 6 weeks and is now at a collector's corral in Florida with bunches of other cars. I am happy to say that the new owner loves the car so much that it's parked in the building doorway so he can drive it when he wants and not have to move his other cars around. This build took 15 months, but those were not 40 hour weeks, the rest of the time we were working on our new...

Stay Tuned

feeds@yuku.com (1967fastbackdotcom) — Sat, 17 Oct 2009 12:17:59 GMT

CARROLL SHELBY GRANTS CLASSIC RECREATIONS LICENSE TO BUILD OFFICIAL SHELBY GT500CR

Internationally recognized custom coachbuilder...

Eleanor Talk